Transmission vs. Scanning Electron Microscope / Intro to Tissues, Organs and Organ Systems




*If you did not complete these in class, you may sign out the "mini-textbook" for one evening
*Due to Mr. Mak by Tuesday, Oct 31!


-Read pg. 17 + answer #2,3,4
-Read pg. 18-19 + answer #3,4
-Read pg. 20-21 #1,2,3,4
-Read pg. 32-33 + answer #1,2


Scanning Electron Microscope (SEM)

*For any budding Scientists at JSB, there is a FREE weekly lecture I highly recommend checking out with your family. The information is linked below:

http://rciscience.ca/lectures/fall-2017-rciscience-talks/

Popular posts from this blog

Water Systems Hands-On Task - Creating Water Filters

Image
Design Task - Creating a Water Filter to Remove Impurities from a Non-Potable Freshwater Sample             In groups, you will research about, design, and then build, two simple water filtration devices, using only materials that can be found in the wilderness. One filter will have three filtration layers and the other one, five layers. You will filter a total of two 500mL samples per device. Your goal is to create the cleanest possible water sample. Successfully filtered water will be judged by having a reasonable odour (smell), have minimal discolouration (“brownish or yellowish-ness”) and look nearly transparent (see-though, with as few floating clumps or particles as possible). Research Before Starting: Articles: https://www.wikihow.com/Make-a-Water-Filter http://all-about-water-filters.com/top-easiest-diy-water-filters-you-can-make-at-home/ http://pbskids.org/zoom/activities/sci/waterfilter.html Videos: https://www.yout
Read more

Hydraulics and Pneumatics

Image
*Our Fluids test will be on Thursday, April 12. If you are absent due to illness or athletics, it is your responsibility to speak to Mr. Mak and make up the test as son as possible. *The Hydraulics and Pneumatics Mini-assignment is due by Friday, April 6 Part 1 - Hydraulics https://www.youtube.com/watch?v=YlmRa-9zDF8 Part 2 - Pneumatics https://www.youtube.com/watch?v=-ZFR73WYqkk Mini-Assigment Questions Pressure machines are grouped as either _________________ or ____________. State the two most important ideas for understanding how a hydraulic system works. Define hydraulic system. Briefly explain how a hydraulic system can “multiply force.” Which fluid is typically used in hydraulic systems? Briefly explain, in your own words, how the hydraulic brakes on a car work. List and briefly describe three examples of real-world uses for hydraulics other than car brakes. What do pneumatic systems use instead of oil or water? In your own words,
Read more

Introduction to Mechanical Advantage and Efficiency

Image
Introduction to Mechanical Advantage and Levers List five things machines do. (p 8) A machine is a _______________ made of one or more _______________ that work together to accomplish a task. (p. 8) Describe the subsystems a can opener is made of and what the role of each subsystem is. (p. 8/figure 2) Explain what a mechanism is. (p. 8) In your own words, explain what a self-correcting control is. (p. 9) Explain what a lever is. (p. 10) Give four or five real-world examples of levers. (p. 10) Explain why are levers useful. (p. 10) Levers are broken down into three types. List them. (p. 10) Give one or two real-world examples for each type of lever. (p. 10/11/figure 1/2/3) All levers require a fulcrum, load force and effort force. Explain what each of these are. (p. 10) Make a quick sketch of a Class I, Class II and Class III level. Neatly label the fulcrum, effort force and load force on each diagram you made. Also label the load arm and
Read more